560 kW at 380-480 V — overload profiles for pump and fan loads
The 6SL3220-1YE66-1CF0: Rated power is 560 kW on a 380-480 V 3AC supply, with overload capability of 135 % for 3 s, 110 % for 60 s, and 100 % for 240 s — the duty cycle typical for centrifugal pumps and axial fans where peak torque is needed only during acceleration or blockage clearing. The integrated RFI suppression filter meets category C3 for the 3AC 380-480 V range, so the drive is suited for industrial networks where the supply is not shared with domestic mains. Ambient temperature rating is 0 to +45 °C; above this the output current must be derated per the SINAMICS G120X manual — the FSJ frame size handles the thermal dissipation for this power class without forced air beyond the internal fan.
Size FSJ enclosure — IP20 with PROFINET and Ethernet IP on board
The FSJ frame is a floor-standing cabinet form factor; the packaging dimensions of 1,200 x 1,857 x 800 mm give the footprint for panel layout planning. Fieldbus is integrated as PROFINET PN and Ethernet IP; no additional communication module is needed for these protocols.
Active production — product class C, manufactured to order
Lifecycle status is active per Siemens, and the product class is C — manufactured/produced to order, not held as standard stock. This means lead time is confirmed at RFQ against the specific BOM quantity. Export control classification is AL: N / ECCN: EAR99H, so no special export license is required for most commercial shipments.
RoHS and REACH compliance documentation
RoHS compliance is declared since 11-03-20; the REACH Article 33 duty-to-inform applies because lead (CAS-No. 7439-92-1) is present above 0.1 % w/w in the product. The declaration of conformity and the REACH candidate-list communication are available from Siemens as part of the product documentation package — these are the documents a compliance audit will request.