The 6SL3220-1YE66-1CP0 is a SINAMICS G120X infrastructure converter rated for 560 kW output at 380-480 V three-phase input, with overload capability of 135% for 3 seconds or 110% for 60 seconds, and 100% for 240 seconds — this duty cycle is typical for centrifugal pump and fan loads where peak torque only occurs during start-up or line upset conditions, not continuous. It ships with an integrated RFI suppression filter for category C3 environments, meaning it meets conducted emission limits for industrial power networks (second environment) without external filtering, but is not intended for residential zones without additional mitigation. The drive is built into size FSJ enclosure with IP20 / UL open-type protection — it requires installation in a clean, dry cabinet or electrical room; the 1,200 x 1,857 x 800 mm footprint demands careful panel layout planning for cable entry and heat dissipation.
Fieldbus integration and commissioning constraints
Fieldbus connectivity is PROFIBUS DP onboard — no optional module needed for connection to Siemens S7-300/400 or third-party PROFIBUS masters; the drive appears as a standard PROFIdrive slave with cyclic data exchange for setpoint, actual value, and control word. The drive includes an IO expansion as standard, providing additional digital and analog I/O for local pump/fan control without a separate remote I/O station. No operator panel is included — parameterization and commissioning require either the optional BOP-2 or the SINAMICS Startdrive / STARTER engineering tool over PROFIBUS.
Export control classification is AL: N / ECCN: EAR99H — no special export license is required for most industrial destinations, simplifying cross-border procurement.
Compliance and substance documentation
RoHS compliant since 11 March 2020 — the drive meets EU Directive 2011/65/EU on restriction of hazardous substances; the REACH Article 33 declaration notes lead (CAS 7439-92-1) above 0.1% w/w in certain components, which is typical for power electronics with high-temperature solder or terminal plating. The RFI filter is certified for category C3 per EN 61800-3, suitable for industrial power networks where the supply impedance is low and conducted emissions limits are relaxed compared to residential C1/C2 environments.