355 kW at the overload profile that matters for pumps and fans
The 6SL3220-1YH58-0CB0 is a SINAMICS G120X infrastructure converter rated 355 kW with a 135% overload for 3 seconds or 110% for 60 seconds, and 100% for 240 seconds — the overload profile is tuned for centrifugal loads where the breakaway torque peak is brief and the running load stays below nameplate. It accepts 3-phase 500-690 V AC +10%/-20% at 47-63 Hz, covering 50 Hz and 60 Hz installations globally without a transformer tap change.
Fieldbus integration without an option card
MODBUS RTU, BACnet MS/TP, and USS are built into the drive — no separate communication module needed for BMS or SCADA integration on HVAC, water, or wastewater lines. The drive ships without an operator panel or IO expansion board; the fieldbus port is the primary interface for parameter access and control.
Compliance and export documentation
RoHS compliant since March 2020; REACH Article 33 disclosure notes lead (CAS 7439-92-1) above 0.1% w/w in the product. Export Control Classification is AL: N / ECCN: EAR99H — no special license required for most destinations, but verify against your end-use and destination.