500 kW at 690 V — overload capacity for pump and fan duty
The 6SL3220-2YH64-1CP0 is a SINAMICS G120X drive rated 500 kW continuous, with a 135% overload for 3 seconds or 110% for 60 seconds — the kind of headroom that handles a stuck valve or a cold-start pump without tripping the drive. The 100% for 240-second rating means it can ride through a low-flow recycle event without derating. The IP20 / UL open type enclosure suits a clean, ventilated cabinet; if the panel sits in a washdown zone, you'll need to locate the drive outside the wet area.
PROFIBUS DP on board — no option slot needed
Fieldbus integration is baked in: PROFIBUS DP is standard, so the drive talks directly to a Siemens S7-300/400 or any DP master without an extra communication module. The basic operator panel (BOP) is included for local parameter access and fault diagnosis — useful during commissioning or when the network is down. The drive also includes an IO expansion board on board, giving you additional digital and analog I/O for feedback or interlocking without adding a separate terminal module. Size FSJ means a larger frame — expect the cabinet cutout and busbar planning to match the 1,200 x 1,857 x 800 mm package dimensions.
It is a class C product (manufactured to order), so availability is confirmed per RFQ rather than held on a shelf. Pricing and lead time are quoted against the specific BOM quantity. RoHS compliance since March 2020; REACH Article 33 disclosure notes lead (CAS 7439-92-1) above 0.1% w/w in certain components. Export control is AL: N / ECCN: EAR99H — no special licensing required for most destinations.