Active production — no lifecycle risk for this BOM line
The 6SL3220-3YH58-0CP0: This SINAMICS G120X drive is listed as Active in production status — no end-of-life notice, no last-time-buy window to track. For a 355 kW infrastructure drive specified into a HVAC or water/wastewater project, that means the BOM position stays stable across the build phase. The product class is C: manufactured to order, which means each unit is built against a specific customer order and cannot be returned or re-sold as standard stock. Plan the procurement lead time accordingly — this is not a shelf-pulled item.
Rated power is 355 kW with a 135% overload for 3 seconds, 110% for 60 seconds, and 100% continuous for 240 seconds. For HVAC centrifugal loads where the peak torque demand is during acceleration and the running torque settles below 100%, this profile gives headroom without oversizing the drive frame. Input voltage range is 3-phase 500-690 VAC +10/-20% at 47-63 Hz. The wide tolerance covers 525 V, 600 V, and 690 V nominal grids common in European and North American industrial installations — no external transformer needed for a 690 V motor. The built-in RFI suppression filter is category C3, meaning it meets conducted emission limits for industrial environments (second environment) per IEC 61800-3. For residential or public low-voltage networks (first environment), an external filter may be required.
Fieldbus and enclosure — PROFIBUS DP, IP20, Size FSH
Integrated fieldbus is PROFIBUS DP — no optional communication module needed for a PROFIBUS control network. The drive ships with the Intelligent Operator Panel (IOP) as standard; the IO expansion module is not included and must be ordered separately if additional I/O points are required. Size FSH is the mechanical frame; the packaging dimensions are 800 x 1870 x 600 mm, so verify the enclosure door swing and lifting provisions before installation.
Compliance documentation — RoHS, REACH, export control
RoHS compliant since 11-03-20. REACH Article 33 duty to inform applies: the candidate list includes lead (CAS 7439-92-1) above 0.1% w/w, which is standard for electronic components with solder joints. Export control classification is AL: N / ECCN: EAR99H — no special license required for most destinations, but EAR99H indicates it contains encryption functionality (PROFIBUS DP stack).