400 kW drive for HVAC and water — what the overload profile means
The 6SL3220-3YH60-1CF0: This SINAMICS G120X is rated 400 kW with a 135% overload for 3 seconds, 110% for 60 seconds, and 100% for 240 seconds — that's the standard HVAC/water pumping duty cycle where short-duration start peaks are handled without oversizing the drive. Input voltage range is 3AC 500-690 V +10/-20% at 47-63 Hz, covering 525 V, 575 V, 600 V, and 690 V nominal grids common in industrial infrastructure. The built-in RFI suppression filter is category C3, so it meets conducted emission limits for industrial environments without an external filter — but it's not suitable for residential or public low-voltage networks without additional attenuation.
Fieldbus and I/O — what's on board
PROFINET PN and Ethernet IP are integrated on the Control Unit — no separate communication module to order, configure, or slot into the rack. The IO expansion is included from the factory, so you get additional digital/analog I/O points without an add-on module. The Intelligent Operator Panel (IOP) is fitted as standard — local parameter access, diagnostics, and commissioning without a laptop.
Compliance and substance restrictions — what you need to document
RoHS compliant since 11 March 2020 — the drive meets the EU directive for restricted hazardous substances. REACH Article 33 duty to inform applies: lead (CAS 7439-92-1) is present above 0.1% w/w, so downstream users must be notified if the article is further distributed. Export Control Classification: AL is N (no embargo restriction), ECCN is EAR99H — no special export license required for most commercial destinations.
This is a Product Class C item — manufactured or produced to order, not held as a stocked shelf good. Packaging dimensions are 800 x 1,870 x 600 mm — plan for pallet-sized freight, not parcel carrier.