45 kW high overload, regenerative — the PM250 power module
The 6SL3225-0BE34-5UA0 is a SINAMICS G120 Power Module PM250, designed for 3-phase 380-480 V AC input at 47-63 Hz. It delivers 45 kW under high overload (HO) conditions: 200% for 3 seconds, 150% for 57 seconds, and 100% for 240 seconds, with an ambient temperature range of 0 to +50 °C. Under light overload (LO), it delivers 55 kW: 150% for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds, with an ambient range of 0 to +40 °C. The PM250 variant includes regenerative capability, meaning it can feed braking energy back into the supply line rather than dissipating it as heat through a braking resistor. This is a key differentiator for applications with frequent deceleration cycles or overhauling loads, such as centrifuges, conveyors on declines, or test stands.
Active production, mature lifecycle — sourcing posture
No stock-holding claim is made; the part is procured per RFQ.
RoHS compliant, REACH lead declaration — compliance detail
RoHS compliant since 18 May 2016. The part also carries a REACH Article 33 duty-to-inform declaration: lead (CAS 7439-92-1) is present above the 0.1% w/w threshold. This is a standard disclosure for industrial power electronics and does not affect normal installation or operation, but it may require downstream notification in certain supply chains.
Cabinet integration — IP20, dimensions, no CU or BOP
The module measures 634 x 350 x 316 mm (HxWxD) and carries IP20 protection, meaning it is intended for installation inside an electrical enclosure. It ships without a Control Unit (CU) or Basic Operator Panel (BOP) — those are ordered separately as the brains and HMI of the G120 drive system. Packaging dimensions are 1,200 x 400 x 620 mm, single piece per unit. The product class is C: manufactured/produced to order, which means it is not a stocked off-the-shelf item — lead time is confirmed at RFQ.