Skip to main content
ABB 1SAP421100R0001

ABB 1SAP421100R0001 CI590-CS31 Slave, 16 I/O

MPN 1SAP421100R0001
Active

ABB CI590-CS31-HA-XC interface module, CS31 slave with media redundancy, 16 configurable DI/DO at 24 V DC 0.5 A transistor outputs, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SAP421100R0001 specifications
ParameterValue
Input voltage24 V DC
Supply voltage20.4 ... 28.8 V DC
Output current0.5 A
IP ratingIP20
Temp operating max70 °C
Temp operating min-30 °C
Delay time0.1 ... 32 ms

Product details

The CI590-CS31-HA-XC (1SAP421100R0001) is a CS31 fieldbus slave that carries 16 configurable digital input/output channels, each switchable to 24 V DC, rated for 0.5 A per channel with transistor outputs. It includes media redundancy – if one trunk cable fails, the slave maintains communication on the remaining path, a practical feature for ring or redundant-line topologies on the CS31 bus. Supply voltage range is 20.4 to 28.8 V DC; the module draws 5 mA from the bus interface for its own logic, separate from the load current handled on the I/O side. The configurable I/O delay can be set between 0.1 and 32 ms, useful for debouncing inputs or tailoring output response in fast cycles. Rated IP20, so it lives in a cabinet. Operating temperature span is -30 to +70 °C, covering most industrial enclosures without forced cooling. WEEE category 5 confirms external dimensions under 50 cm – small enough for a crowded DIN rail.

Transistor outputs are sourcing (PNP logic) – common positive side. Each output can sink 0.5 A continuous; total package limit isn't stated individually, so derate in high-ambient or dense wiring bundles. The 24 V DC supply powers both the module and the I/O loop; no separate relay coil supply needed. CS31 bus connection uses standard two-wire twisted pair; media redundancy requires a second cable looped back to the master. Dip-switch addressing for slave ID – set before power-up. No Ethernet interface on this variant: only the CS31 serial bus.

Sourcing reality

Active product – quoted to order per RFQ. No published direct cross-reference for this order code.

MPN
1SAP421100R0001