Skip to main content
ABB 1SDA053681R1

ABB 1SDA053681R1 SOR-C Shunt Release, 110-127V AC/DC, for Tm

MPN 1SDA053681R1
Active

ABB, SACE Tmax T series, SOR-C shunt release, 1SDA053681R1, 110-127V AC / 110-125V DC, IEC compliant, for T1-T3 frames.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SDA053681R1 specifications
ParameterValue
Configuration typeLoose or configurable
Voltage110 ... 127 V AC

Product details

ABB 1SDA053681R1 is a SOR-C shunt release for SACE Tmax T breakers, frames T1, T2, T3. It trips on 110...127 V AC or 110...125 V DC. Active lifecycle status, no last-time-buy notice.

On the AC side, the lower bound of 110 V accommodates a sagging 120 V control bus under load; the 127 V ceiling covers a nominal 120 V +10 % tolerance. On the DC side, 110-125 V covers standard station battery ranges. The release is IEC-listed, which means it meets the performance and safety requirements of the International Electrotechnical Commission — the default standard for global panel builds outside North America (where UL 489 also applies, and the order code KT3S4 covers the UL/CSA variant).

This release mounts into the breaker's accessory slot on the Tmax T1, T2, or T3 frame — no additional DIN-rail space needed. The coil draws from the control circuit, not the main power path, so it's wired separately through the breaker's auxiliary terminal block. Verify the free-wheel diode polarity on the DC side before energizing; reversed polarity on a DC shunt release can weld the plunger.

MPN
1SDA053681R1