Skip to main content
Fuji Electric FRN0003G2S-4GU

Fuji Electric FRN0003G2S-4GU FRENIC-Eco Drive, 1 hp, 2.5 A

MPN FRN0003G2S-4GU

Fuji Electric FRENIC-Eco Series, FRN0003G2S-4GU, 1 hp VFD, 2.5 A output, 380-480 VAC three-phase input, NEMA 1.

$625.90 – $649.55 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FRN0003G2S-4GU specifications
ParameterValue
SeriesFRENIC - Eco
Input typeAnalog; Digital
Output signalAnalog; Digital
Control typeKeypad, Remote
Display typeLCD/LED
Voltage480 V AC
Input voltage460 V AC
Input voltage range380 V-480 V AC +10% / -15%
IP ratingNEMA 1
ColorBlue
ApplicationHV AC
I/O channels(7) Digital; (3) Analog
Control methodVariable Frequency Control

Product details

The Fuji Electric FRN0003G2S-4GU is a 1 hp variable-frequency drive from the FRENIC-Eco series, rated for 2.5 A continuous output on a three-phase 480 VAC supply. Input accepts 380–480 VAC ±10%/-15% at 50/60 Hz, so it handles nominal 400 V and 460 V line voltages without a transformer. Output frequency spans 0.1 to 120 Hz, covering standard induction motor speed ranges for fans and pumps. The NEMA 1 open enclosure means it's intended for indoor, non-washdown environments — mount it in a clean panel or cabinet. The blue heat-sink style is the standard FRENIC-Eco package; it dissipates heat through the rear fins, so leave at least 4 inches of clearance above and below for airflow.

Protection and control

Built-in protections cover drive thermal overload, motor thermal overload, overvoltage, undervoltage, phase failure, phase-to-phase and phase-to-ground short circuits, and over-braking. That's a full suite — no external motor-protection relay needed for most single-motor applications. Control is via the keypad or remote contact signal; the LCD/LED display shows motor speed, alarm codes, output frequency, current, and voltage. Starting torque is rated at 50% at 1 Hz, which is typical for variable-torque loads like centrifugal fans and pumps. For constant-torque or high-starting-torque applications (conveyors, crushers), you'd want a drive with a higher torque spec or sensorless vector control. Dynamic braking is supported, but the brake chopper is not included — you'll need an external braking resistor and a chopper module if you're stopping a high-inertia load quickly.

MPN
FRN0003G2S-4GU