Skip to main content
Siemens 3RK1315-6LS41-2AA3

Siemens 3RK1315-6LS41-2AA3 SIRIUS Motor Starter

MPN 3RK1315-6LS41-2AA3
NRND

Siemens SIRIUS 3RK1315-6LS41-2AA3 direct motor starter, 5.5 kW at 400 V, CLASS 10, IP65, AS-Interface, 4 digital inputs, 159 mm depth, 294 mm width, 215 mm height.

$459.74 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1315-6LS41-2AA3 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Depth159 mm
Width294 mm
Height215 mm
Trip classCLASS 10

Product details

SIRIUS direct starter, 5.5 kW at 400 V, CLASS 10

The Siemens 3RK1315-6LS41-2AA3 is a SIRIUS direct motor starter — a self-contained unit combining a contactor, overload relay, and AS-Interface communication in one IP65 enclosure. It is rated for 5.5 kW at 400 V and 5.5 kW at 500 V, with horsepower ratings of 3 hp at 230 V, 7.5 hp at 480 V, and 10 hp at 600 V. The CLASS 10 trip class means the overload relay will trip within 10 seconds at 7.2× the set current — fast enough to protect standard induction motors from locked-rotor heating without nuisance tripping on normal starts. Supply voltage is 24 VDC nominal, with a permissible range of 20.4 to 28.8 VDC and an absolute maximum of 31.6 V — the 26.5 V minimum permissible ensures reliable operation even with a sagging 24 V bus.

AS-Interface fieldbus with 4 digital inputs

Communication is via AS-Interface protocol — a two-wire bus that carries both power and data to the starter. Device addressing is set through an M12 plug, and the main current circuit connects via a HAN Q4/2 connector per ISO 23570. Four digital inputs are integrated into the unit, allowing local pushbuttons or sensors to be wired directly without a separate I/O block. The ON-delay is 85 ms and the OFF-delay is 65 ms — these sequencing delays prevent rapid cycling on a bouncing start signal. The starter supports direct starting and on-site operation, but does not support reverse starting or PROFINET/PROFIBUS DP protocols — it is an AS-Interface-only device.

IP65 enclosure, screw fixing, horizontal preferred

The IP65 protection class means the enclosure is dust-tight and protected against water jets — suitable for washdown areas or dusty industrial environments without a separate cabinet. Mounting is by screw fixing, with horizontal orientation recommended, though vertical and flat positions are permitted. Dimensions are 159 mm deep, 294 mm wide, and 215 mm tall — a compact footprint for a fully integrated motor starter with fieldbus. The pollution degree is 3 (conductive pollution), so the unit is designed for industrial atmospheres where occasional condensation occurs. Shock resistance is rated at 12g for 11 ms, and vibration resistance at 7 mm / 2g — the starter can be mounted on machinery that experiences moderate mechanical shock without loosening connections.

Active production, sourced to order

Operating temperature range is -25 to +55 °C, with storage and transport limits of -40 to +70 °C — the unit can be stored in unheated warehouses and deployed in most factory-floor environments.

MPN
3RK1315-6LS41-2AA3