Skip to main content
Siemens 3RK1902-4BA00-5AA0

Siemens 3RK1902-4BA00-5AA0 M12 Connector, 5-Pole, IP67, 4A

MPN 3RK1902-4BA00-5AA0
Active

Siemens SIRIUS 3RK1902-4BA00-5AA0, M12 straight connector, 5-pole A-coded, screw terminals, max. 0.75 mm², 4 A per pin, IP67, 60 V, active lifecycle.

$13.97 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK1902-4BA00-5AA0 specifications
ParameterValue
Connector typePin
Poles5
IP ratingIP67
Depth20 mm
Width20 mm
Height60 mm

Product details

M12 Field-Attachable Connector for Sensor/Actuator Wiring

The Siemens 3RK1902-4BA00-5AA0 is a straight M12 connector with a 5-pole A-coded pin layout, designed for field termination of sensor and actuator cables in industrial automation panels. Screw terminals accept flexible conductors up to 0.75 mm², and each pin is rated for a maximum of 4 A at up to 60 V. The zinc diecast, nickel-plated enclosure carries an IP67 rating, so the connector withstands washdown environments and dusty factory floors — suitable for food-and-bev or machine-tool zones where coolant spray is routine.

The 4 A per-pin ampacity governs the total load the connector can carry across all five poles. For a typical 24 VDC sensor loop drawing 200 mA, this leaves ample headroom; for a multi-pin actuator bundle, sum the loads per pin and stay under 4 A each. The 60 V maximum operating voltage limits the connector to low-voltage control circuits — it is not rated for mains power or 120 VAC pilot devices. The 0.8 kV surge voltage resistance (rated value) provides basic transient protection for the connected electronics. The M12 x 1 thread and 4–6 mm cable inlet diameter are standard for M12 sensor cables. The connector's 100 mating cycles mechanical service life means it is designed for occasional disconnect during maintenance, not daily plug/unplug on a test bench. For frequent connection changes, consider a pass-through or panel-mount receptacle instead.

RoHS conformity is confirmed. The connector carries IEC and cUL approvals but not UL or CSA marks — verify acceptance with your local inspector if the panel requires a UL-listed component. CCC and C-Tick are not certified, so the part may not be directly importable into China or Australia without separate compliance review. The enclosure material is zinc diecast, nickel-plated; the connector fixed part is polyamide.

MPN
3RK1902-4BA00-5AA0