Skip to main content
Siemens 3RW4024-2BB14

Siemens 3RW4024-2BB14 SIRIUS Soft Starter, 12.5 A, S0 Frame

MPN 3RW4024-2BB14
Active

Siemens SIRIUS 3RW4024-2BB14 soft starter, S0 frame size, 12.5 A at 40 °C, 110-230 V DC control supply, integrated bypass, spring-loaded terminals, screw and snap-on mounting.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4024-2BB14 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth155 mm
Width45 mm
Height150 mm

Product details

What this SIRIUS soft starter delivers

The 3RW4024-2BB14: It carries an integrated bypass contact system, so once the motor is up to speed the thyristors are shorted out — no heat sink losses during run, and the bypass contact carries the continuous current. The control supply accepts 110-230 V DC, which covers most industrial control voltages without needing a separate supply converter.

Current derating in the panel

Derating temperature is 40 °C; above that the output must be reduced per the curve. The minimum load is 20 % of the rated current, which means it won't regulate properly on a lightly loaded motor.

Mounting and wiring constraints

Mounts on DIN rail via screw and snap-on — 45 mm wide, 150 mm tall, 155 mm deep. Clearance required: 60 mm above, 40 mm below, 15 mm at the sides. Main current circuit uses spring-loaded terminals accepting 2x (0.25-2.5 mm²) solid or 1x 8 mm² at the front clamping point. Auxiliary and control circuits also use spring-loaded terminals, 2x (24-14 AWG). No screw torque to check — just strip and push. Maximum wire length to the motor is 300 m — beyond that, voltage drop and cable capacitance can cause nuisance tripping or missed starts.

Protection and adjustability

Built-in motor overload protection and intrinsic device protection are standard — no separate overload relay needed for the soft starter itself. The current limitation is adjustable, so you can set the start current to match the load and the supply capacity. Pollution degree 3 per IEC 60947-4-2 means it's rated for industrial environments with conductive pollution — typical for control panels in factories and process plants. The storage climate class is 1K6 (occasional condensation, no salt mist, sand excluded).

Lifecycle and supply

No official successor or cross-reference is listed for this order code. The SIRIUS 3RW40 family is current; confirm the BOM line voltage and motor FLA against the derating table before committing.

MPN
3RW4024-2BB14