Skip to main content
Siemens 3SF3200-8CV00-0BA1

Siemens 3SF3200-8CV00-0BA1 AS-i Position Switch, 2NC, IP65

MPN 3SF3200-8CV00-0BA1

Siemens SIRIUS 3SF3200-8CV00-0BA1 communication-capable position switch, block housing EN 50047, rounded plunger, AS-i insulation displacement connection, IP65, 2 NC contacts, positive opening.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3SF3200-8CV00-0BA1 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Temp operating max60 °C
Temp operating min-25 °C
Sensing distancemechanical

Product details

The Siemens 3SF3200-8CV00-0BA1 is a communication-capable position switch with an integrated AS-i interface, designed for direct connection to an AS-i bus network via the insulation displacement method. It carries a positive-opening switching function (per EN 60947-5-1) — meaning the NC contacts are mechanically forced open when the actuator is depressed, regardless of weld or spring failure. That makes it suitable for safety-related position detection on doors, guards, or movable machine elements where a fail-safe signal is required. The housing is a molded-plastic block design to EN 50047, 31 mm wide, with a rounded plunger actuator (6 mm diameter). It provides 2 normally-closed (NC) auxiliary contacts and no normally-open (NO) contacts. The positive-opening feature applies to both NC contacts, so the switch can be wired into a safety circuit that monitors guard position. The mechanical active principle means no electronics in the switching path — just a direct mechanical link from plunger to contact block.

Integration notes

Mounting is by screw fixing through the block housing — no DIN-rail clip on this variant. The switch head conforms to EN 50047 design B, so it fits standard actuator heads and cam tracks used across the SIRIUS 3SF3 family. The 6 mm plunger overtravel is built in, meaning the switch can be driven past the snap point without damage, which is typical for cam-operated guard doors. Electrical connection is via AS-i insulation displacement terminals — no screw terminals, no tool needed beyond a wire stripper. The AS-i flat cable is simply pressed into the slots. This saves wiring time on a multi-station line but locks you into the AS-i protocol (no Profinet, no IO-Link).

MPN
3SF3200-8CV00-0BA1