Skip to main content
Siemens 3SF3210-1CV00-0BA2

Siemens 3SF3210-1CV00-0BA2 Position Switch, AS-i, 1 NC, IP65

MPN 3SF3210-1CV00-0BA2

Siemens SIRIUS 3SF3210-1CV00-0BA2 communication-capable position switch, mechanical, AS-i insulation displacement connection, 1 NC positive-opening contact, IP65, molded-plastic block housing EN 50047, rounded plunger.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3SF3210-1CV00-0BA2 specifications
ParameterValue
IP ratingIP65
Mountingscrew fixing
Temp operating max60 °C
Temp operating min-25 °C
Sensing distancemechanical

Product details

The Siemens 3SF3210-1CV00-0BA2 is a communication-capable position switch with an integrated AS-i (Actuator-Sensor Interface) adapter, designed for direct connection to an AS-i network without a separate gateway module. It uses a mechanical active principle with a rounded plunger actuator and a positive-opening switching function — meaning the NC contact is mechanically forced open when the plunger is depressed, regardless of weld or spring failure. This positive-opening behavior (confirmed by the product function flag) is what makes it suitable for safety-related limit switching in machine guarding applications where a fail-safe state must be guaranteed. The housing is a molded-plastic block design per EN 50047, measuring 50 mm wide, with screw fixing for panel or machine-frame mounting. The switch head is rounded with a 6 mm outer diameter plunger. Protection class IP65 means the enclosure is dust-tight and protected against water jets — adequate for washdown areas in food processing or packaging lines, though not for submersion or high-pressure spray. Electrical connection is via the AS-i insulation displacement method — the flat cable is pressed into the contact slots without stripping, which speeds installation on a bus line. The switch carries one NC (normally closed) auxiliary contact and no NO contacts, so it's a single-channel safety input.

Integration notes

Mounts via screw fixing to a flat panel or machine frame — no DIN rail provision on this block-style housing. The 50 mm width matches the EN 50047 footprint, so it fits standard cutouts for limit switches of this class. The AS-i insulation displacement connection uses the standard two-wire flat cable; no additional bus coupler is needed at the switch itself, but the AS-i network requires a master at the controller end. The rounded plunger actuator has a 6 mm diameter and is designed for overtravel — it can be depressed past the switching point without damage, which is useful when the cam or dog on the machine continues moving after actuation. The positive-opening NC contact provides a direct mechanical link between plunger position and contact state, so it can be wired into a safety circuit without relying on spring return alone.

MPN
3SF3210-1CV00-0BA2