Skip to main content
Siemens 4EU3022-7AA00-0AA0

Siemens 4EU3022-7AA00-0AA0 Commutating Choke, 200A Max, 690V

MPN 4EU3022-7AA00-0AA0

Siemens 4EU3022-7AA00-0AA0 commutating choke for converter, 3-phase, 690V AC, 180A rated (200A max), 0.24mH, 4% voltage drop, IP00, Class H insulation.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3022-7AA00-0AA0 specifications
ParameterValue
IP ratingIP00
Depth0.211 m
Width0.3 m
Height0.269 m

Product details

The Siemens 4EU3022-7AA00-0AA0 is a three-phase commutating choke for converter input circuits. It limits current rise and harmonics on the AC line. Rated 180 A continuous with a 200 A maximum, it handles 690 V AC at 50 Hz and delivers 0.00024 H inductance with a 4% voltage drop. This is an open-frame (IP00) component — no enclosure, so it mounts inside a cabinet or panel where the environment is clean and dry. The flat-type terminals accept busbar or cable lugs for the main circuit connection. Thermal class H per IEC 60085 means the winding insulation withstands 180 °C hot-spot temperature, which suits the high ambient (40 °C rated) and the combined copper and iron losses of 342 W total.

The 180 A rated current (200 A max) is the continuous thermal current (Ith) at 40 °C ambient — this is the current the choke can carry indefinitely without exceeding the Class H temperature rise. For a 690 V drive system, that translates to roughly a 200–250 kW motor load depending on the drive topology and overload profile. The 0.00024 H inductance with a 4% voltage drop at 50 Hz limits di/dt and reduces harmonic distortion. A 4% impedance is a common choice for general-purpose drive applications. The 342 W total power loss (210 W copper + 132 W iron) is heat that must be managed inside the enclosure. At 180 A, that's about 1.9 W per amp — factor this into your panel ventilation or forced-air cooling calculation.

The design complies with EN 61558-2-20, the standard for chokes and reactors for power supplies and converters. This is the relevant IEC safety standard for this component class.

MPN
4EU3022-7AA00-0AA0