Skip to main content
Siemens 4EU4321-0EE10-0A

Siemens 4EU4321-0EE10-0A Mains Choke for VFD, 531A, 400V, 50

MPN 4EU4321-0EE10-0A

Siemens SENTRON 4EU4321-0EE10-0A mains choke for frequency converters, 3-phase, 400V AC, 531A rated current, 590A max, 0.075mH, 6% voltage drop, IP00, thermal class H.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU4321-0EE10-0A specifications
ParameterValue
IP ratingIP00
Depth0.265 m
Width0.46 m
Height0.435 m

Product details

What this mains choke does on a VFD line

It smooths the current drawn from the supply, reduces harmonic distortion, and limits inrush peaks — essential for protecting the drive's rectifier and extending DC-link capacitor life. Rated 531 A continuous with a 590 A maximum, it sits upstream of a VFD feeding a large motor load, typically a pump, fan, or conveyor on a 400 V AC, 50 Hz line. At 40 °C ambient, the thermal class H insulation (200 °C continuous rating) gives headroom for sustained full-load operation inside a warm cabinet.

The choke measures 0.46 m wide by 0.435 m high by 0.265 m deep — a substantial unit that requires dedicated panel floor space, not a DIN-rail clip. Main circuit connections use flat-type terminals (bus-bar or cable lug), typical for high-current line reactors of this class.

The 590 A maximum is the short-term overload ceiling — useful for motor starting inrush or temporary overload conditions. A 6 % voltage drop at rated current is the industry-typical impedance for VFD input reactors; it provides enough harmonic mitigation to meet IEEE 519 guidelines without dropping excessive voltage across the choke under full load.

MPN
4EU4321-0EE10-0A