Skip to main content
Siemens 5SJ4103-7HG41

Siemens 5SJ4103-7HG41 SENTRON MCB, 1-pole C-curve, 10 kA

MPN 5SJ4103-7HG41
Active

Siemens SENTRON 5SJ4 series, miniature circuit breaker, 1-pole, C-curve, 10 kA (EN 60898) / 15 kA (IEC 60947-2), 400 V AC / 60 V DC, 18 mm width, DIN rail mount.

$36.83 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SJ4103-7HG41 specifications
ParameterValue
Poles1
Mountingon standard mounting rail
Depth70 mm
Width18 mm
Height110 mm

Product details

Its 18 mm width (1 MW) fits a single modular slot in any distribution board or control panel. Mounting position is unrestricted — install it horizontally or vertically as the cabinet layout demands. Terminals are combined (screw + clamp) top and bottom, accepting Cu conductors at a tightening torque of 3.5 Nm. No tunnel terminals — the combined design suits both solid and stranded wire without ferrules. IP20 with connected conductors;

Breaking capacity and trip curve

Rated at 400 V AC and 60 V DC maximum. The DC rating is limited to 60 V, so for 110 V DC or 220 V DC battery banks you need a different breaker. Insulation voltage (Ui) is 440 V AC — the breaker is insulated for 440 V line-to-line but its switching duty is capped at 400 V AC. Supply frequency is 50 Hz. No 60 Hz rating is listed — if your installation runs on 60 Hz, confirm thermal performance with the manufacturer. Ambient humidity tolerance is 95% max, non-condensing.

Environmental and mechanical specs

Vibration resistance is rated at 50 m/s² over 25–150 Hz and 60 m/s² at 35 Hz (4 sec) — sufficient for machine-mounted panels near rotating equipment. The breaker is suitable for mechanical engineering and industry applications per the manufacturer's own classification. EMC environment B (immunity not applicable) means it is intended for industrial premises where conducted and radiated interference levels are controlled by the installation.

MPN
5SJ4103-7HG41