Skip to main content
Siemens 5SL6140-7YA

Siemens 5SL6140-7YA SENTRON MCB, 40A 1P C-Curve 6kA

MPN 5SL6140-7YA

Siemens SENTRON 5SL6140-7YA, miniature circuit breaker, 1-pole, 40 A, C characteristic, 6 kA breaking capacity per EN 60898, 400 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL6140-7YA specifications
ParameterValue
Poles1
IP ratingIP20
Temp operating max45 °C
Temp operating min-25 °C
Depth76 mm
Width18 mm
Height90 mm

Product details

The C curve means it's built for moderate inrush loads: lighting banks, small transformers, and general-purpose socket outlets where the start-up surge is higher than a resistive load but not motor-grade. At 40 A on a single pole, this is a main incomer for a sub-distribution board or a high-current branch circuit.

Snaps onto standard DIN rail — 18 mm width (one modular unit), 90 mm height, 76 mm depth. Terminals accept solid or stranded copper from 0.75 mm² up to 25 mm², tightened to 2.5–3 N·m. That's a wide enough wire range to feed a 40 A circuit with 6 mm² or 10 mm² without adapters. Mounting position is unrestricted, so it fits in vertical or horizontal busbar arrangements. IP20 with the distribution board cover fitted — standard for enclosed panels, not for wet areas.

If your installation has a higher fault level (say 10 kA or 16 kA upstream), you'd need a higher-rated MCB or a current-limiting upstream device — but for most final circuits fed from a 63 A or 100 A main switch, 6 kA is adequate. The 10 000 mechanical switching cycles are the mechanical endurance — electrical life under load will be lower, but for a panel that sees a few operations a week, that's decades of service.

MPN
5SL6140-7YA