Skip to main content
Siemens 6EP3436-8UB00-0AY0

Siemens SITOP PSU6200 6EP3436-8UB00-0AY0, 24V 17A, 94% Effic

MPN 6EP3436-8UB00-0AY0
Active

Siemens SITOP PSU6200, 3-phase power supply, 6EP3436-8UB00-0AY0, 24 V DC / 17 A, 94 % efficiency, DIN rail mount.

$191.77 – $296.94 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP3436-8UB00-0AY0 specifications
ParameterValue
Voltage24 V
Power408 W
Frequency47 ... 63 Hz
Phases3-phase
IP ratingIP20
MountingSnaps onto DIN rail EN 60715 35x7.5/15
Depth125 mm
Width70 mm
Height125 mm
Efficiency94%

Product details

The 6EP3436-8UB00-0AY0: Rated current holds at 17 A up to +60 °C ambient; above that, derate 2 % per Kelvin up to +70 °C. That derating curve matters if the supply shares a poorly ventilated enclosure with heat-generating kit.

Efficiency and approvals

94 % efficiency at rated load — that's better than the 90–92 % typical of older SITOP Smart or standard series. Less waste heat means a smaller enclosure or tighter packing density. Carries cULus listing to UL 508 and CSA C22.2 No. 107.1 (File E197259), plus CE and EAC. No ATEX or IECEx, so not for Zone 2/22 environments without an upstream isolation barrier. Shipbuilding approvals from ABS and DNV GL are on file — relevant for marine or offshore panel builds where classification society sign-off is required.

Snaps onto DIN rail EN 60715 35×7.5/15 — standard profile. No drilling, no backplate adapter. IP20, so it's for inside the cabinet only. Input terminals:, L2, L3, PE — one screw terminal each, accepting 0.2…4 mm² single-core or finely stranded. Output side: two screw terminals each for + and -, same wire range. No ring-tongue crimps needed. Required upstream protection: a 3-pole miniature circuit breaker 6…16 A, characteristic C, or Siemens 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489). Don't skip this — the supply has no internal input fuse.

Clearance and environment

Maintain 50 mm clearance above and below the unit for natural convection cooling; zero clearance on the sides. Stacking units without that vertical gap will derate the output prematurely. Operating range -25…+70 °C with natural convection; storage and transport -40…+85 °C. The 3.5 mA maximum leakage current (0.9 mA typical) is low enough to avoid nuisance tripping on standard 30 mA RCDs.

MPN
6EP3436-8UB00-0AY0