Skip to main content
Siemens 6ES7132-4BB31-0AB0

Siemens 6ES7132-4BB31-0AB0 ET 200S Digital Output Module, 2A

MPN 6ES7132-4BB31-0AB0

Siemens ET 200S electronic module, 6ES7132-4BB31-0AB0, 2-channel source output (PNP), 2 A rated per channel, diagnostics per channel, wire-break and short-circuit detection.

$164.59 – $377.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7132-4BB31-0AB0 specifications
ParameterValue
Depth52 mm
Width15 mm
Height81 mm

Product details

The Siemens 6ES7132-4BB31-0AB0 is a current-production ET 200S 2-channel source output module rated at 2 A per channel, drawing power from the 24 V DC backplane. It provides PNP (source) outputs, each capable of 2 A continuous with a maximum module current of 4 A. Response threshold for overcurrent is 4 A typical; short-circuit protection is channel-based and can be disabled/enabled via diagnostics. Diagnostics function detects wire-break (threshold 12 Ω to 3 400 Ω) and short-circuit per channel. On CPU/master STOP, the module can substitute a configured 0 or 1 value or keep the last value — deterministic behavior for fail-safe segments. Reverse voltage protection is present only when sharing the same load voltage as the power module. Polarity reversal can cause the outputs to be connected through; verify the rail topology before wiring.

Physical Fit and Slot Allocation

The module occupies a 15 mm wide slot on the ET 200S terminal block, with a depth of 52 mm and height of 81 mm. This width is the same as many 2-channel modules, so plan your I/O count and station bus length accordingly. Shielded cable runs up to 1 000 m and unshielded up to 600 m. Switching frequency on resistive load is 100 Hz; with inductive load (0,5 H) it drops to 2 Hz. Power loss is 1.4 W typ, minimal for thermal planning in dense cabinets.

MPN
6ES7132-4BB31-0AB0