Skip to main content
Siemens 6ES7132-4HB00-0AB0

Siemens 6ES7132-4HB00-0AB0 ET 200S 2 DO Relay, 5A, 5-Pack

MPN 6ES7132-4HB00-0AB0

Siemens SIMATIC DP ET 200S 2 DO relay module, 24V DC – 230V AC, 5A, 15mm width, 5 per packaging unit.

$106.30 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7132-4HB00-0AB0 specifications
ParameterValue
Depth52 mm
Width15 mm
Height81 mm

Product details

Integrator's note

The 6ES7132-4HB00-0AB0: This is a SIMATIC DP ET 200S electronic module carrying 2 relay digital outputs. Each output is rated for 5 A thermal continuous current, switching resistive loads at up to 2 Hz, inductive loads at 0.5 Hz, and lamp loads at 2 Hz. The coil and contacts share a 24 V DC supply drawn from the ET 200S power module — no separate load power required. Reverse polarity protection is built in. The module occupies a 15 mm slot in the ET 200S terminal block assembly. Dimensions: 15 mm width, 52 mm depth, 81 mm height. Status indication via a green LED per channel and an SF LED for group fault. Response to a CPU or master STOP is configurable to substitute a value or keep the last value (0/1). Isolation is provided between channels and backplane bus, and between channels and load voltage L+. Maximum shielded cable length is 1 000 m; unshielded, 600 m.

Installation & wiring highlights

Mounts on any ET 200S terminal module (BU type A0, A1, etc.). The 15 mm width allows dense packing on the DIN rail. No auxiliary power wiring needed beyond the backplane connector. For relay loads, note the minimum load current for signal "1" is 8 mA. When driving inductive loads, the module does not provide an internal limitation of inductive shutdown voltage — external free-wheeling diode or RC snubber is recommended per Siemens practice. Diagnostic function is not available on this module; fault detection relies on the group fault LED.

MPN
6ES7132-4HB00-0AB0