The ABB 1SDA066479R1 is a stand returned handle for the Tmax XT1 and XT3 molded-case circuit breakers, designated as the RHE XT1-XT3 F/P STAND. RETURNED variant. It is designed as a loose, configurable accessory for these breaker frames, allowing external rotary handle operation with a returned position indicator. The standard covers everything from rated insulation voltage to short-circuit making and breaking capacity, so the handle's compliance means it is tested to the same duty cycle as the XT1 and XT3 frames it mounts to. Lifecycle status is active, so this is a current-production part — no last-time-buy or replacement search needed for new BOM lines.
RoHS compliance follows EU Directive 2011/65/EU and Amendment 2015/863, covering the ten restricted substances including lead, mercury, and cadmium. The TSCA certification (9AKK108467A8326) confirms it is compliant with the Toxic Substances Control Act for US import and use. A Conflict Minerals Reporting Template (CMRT) is also available under document 9AKK108467A5658. WEEE Category 4 (Large Equipment) applies, meaning end-of-life disposal follows the EU Waste Electrical and Electronic Equipment Directive for equipment with any external dimension over 50 cm. The environmental information document is 9AKK108467A6707.
This handle mounts to the front of Tmax XT1 and XT3 breakers, providing a rotary operating mechanism with a stand-returned (spring-return to OFF) function. The 'F/P' designation indicates it is for fixed or plug-in versions of these breakers. It is a loose accessory — not pre-assembled — so it installs during panel build or retrofit.