The 1SFA897106R7000: The ABB PSE60-600-70 is a 60 A soft starter for 208 to 600 V AC motors, with integrated torque control to tailor the starting curve and built-in electronic overload protection. Communication over Modbus-RTU lets the PLC monitor current limit, ramp time, and fault status without hardwired status signals. Rated control voltage is 24 V DC, so it pulls directly from a standard 24 V bus without a separate transformer. The three integrated relays – run, fault, bypass, and overload – each output a clean dry contact for the control system.
1SFA897106R7000 ABB PSE60-600-70 Softstarter 60A, Modbus-RTU
MPN1SFA897106R7000
Active
ABB PSE60-600-70 Softstarter - 60 A - 208... 600 V AC, torque control, Modbus-RTU, screw terminals.
$1,061.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Terminal type | Screw Terminals |
| Product main type | PSE60 |
| Voltage | 208 ... 600 V AC |
| Initial voltage during start | 30 ... 70 % |
| Step down voltage special ramp | No % |
| Rated control supply voltage | 100 ... 250 V AC |
| Rated control circuit voltage | 24 V DC |
| Technical UL (CSA, maximum operating voltage UL, CSA) | Main Circuit 600 V |
| Current limit function | 1.5 ... 7xIe |
| Starting capacity at maximum rated current ie | 4xIe for 10s |
| Rated operational current - In-Line connection | 60 A |
| Technical UL (CSA, horsepower rating UL, CSA) | (200 ... 208 V AC) Three Phase 20 Hp |
All specifications+38 ▾
| Parameter | Value |
|---|---|
| Rated operational power - In-Line connection | (230 V) 15 kW |
| Rated frequency | 50/60 Hz |
| IP rating | acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00 |
| Protocol | Modbus-RTU |
| Switch for inside delta connection | No |
| Material compliance (SCIP) | 6528473c-4979-467d-a71c-ecd91610a0bc Sweden |
| Popular downloads (CAD dimensional drawing) | 2CDC001079B0201 |
| Material compliance (Toxic substances control act - TSCA) | 2CMT2023-006524 |
| Material compliance (Conflict minerals reporting template) | 9AKK108467A5658 |
| Technical UL (CSA, tightening torque UL, CSA) | Control Circuit 4.4 in·lb |
| Function | Soft start with torque control |
| Ramp time | 0 ... 30 second [unit of time] |
| Analog outputs | 4...20 mA |
| Run signal relay | Yes |
| Tightening torque | Control Circuit 0.5 N·m |
| Fault signal relay | Yes |
| Overload protection | Build-in electronic overload protection |
| Protection function | Electronic overload protection, EOL; Locked rotor protection; Current underload protection |
| By-pass signal relay | Yes |
| Overload signal relay | Yes |
| Ambient air temperature | Operation -25 ... +60 °C |
| Service factor percentage | 100 % |
| Object classification code | Q |
| Popular downloads (EPLAN data) | 9AAC170230_EPLAN |
| Signal indication fault | Red |
| Integrated electronic overload | Yes |
| Connecting capacity main circuit | Hole Diameter 8.5 mm |
| Signal indication running r | Green |
| Connecting capacity supply circuit | Rigid 1 x 2.5 |
| IDEA granular category code | 4740 >> Soft starter |
| Signal indication protection | Yellow |
| Connecting capacity control circuit | Rigid 1 x 2.5 mm² |
| Signal indication ramping up (Down) | Green |
| Popular downloads (Instructions and manuals) | 1SFC132427M0201 |
| Signal indication completed start ramp | Green |
| Popular downloads (Data sheet, technical information) | 1SFC132012C0201 |
| Popular Downloads/Instructions and manuals (Part 2) | 1SFC132057M0201 |
| Popular Downloads/Instructions and manuals (Part 3) | 1SFC132060M0201 |
Product details
Frequently asked questions
What is the listed title and function of this part?
Listed title: PSE60-600-70 Softstarter - 60 A - 208... 600 V AC. Function: soft start with torque control.
MPN
1SFA897106R7000