The ABB 3ABD00046999-D is an ACS880-01 wall-mounted drive rated 18.5 kW normal-duty output at 34 A, fed from a 380-500 V three-phase line. It carries a heavy-duty rating of 15 kW / 27 A for tougher cyclic loads, and a light-overload rating of 18.5 kW / 32 A. The IP21 enclosure keeps dust and dripping water out — fine for a clean panel floor, not for washdown. Frame size R3, IE2 efficiency class.
The heavy-duty derating to 15 kW tells you this drive is sized for a motor that sees occasional overloads — a conveyor start or a crusher jam. On a steady pump or fan load, the full 18.5 kW normal-duty figure is the one to spec by. The light-overload curve sits between the two at 32 A, which covers applications that pull a bit more than nameplate for short stretches.
Wall-mounted, NEMA Type 1 enclosure, IP21. The R3 frame is the physical size — mounts on a backplate or a standoff kit. Input frequency range is 47.5 to 63 Hz, so it handles 50 or 60 Hz supply without a setting change. Three-phase input only; no single-phase variant here. The 34 A normal-duty output current is the number to match against your motor FLA.