The ABB 3ABD00059505-D is an ACS880-01 wall-mounted single drive rated for 200 kW normal use at 361 A, with heavy-duty output at 302 A and light-overload at 343 A. Input is 380-500 V three-phase, 48-63 Hz, in a Frame R9 enclosure with IP21 protection and NEMA Open Type construction. The drive includes position control capability, making it suitable for applications requiring precise motion sequencing alongside standard variable-speed motor control.
The 361 A normal-use rating defines the continuous output current for typical industrial motor loads. Heavy-duty use at 302 A applies when the drive must handle higher overload margins — for example, in crushers or conveyors with frequent start-stop cycles. All three power ratings converge at 200 kW, meaning the drive's thermal capacity is the same; the current difference reflects the overload capability built into the heavy-duty and light-overload curves.
Wall-mounted in an IP21 enclosure — suitable for indoor, clean environments where drips and falling dirt are the main concern. The NEMA Open Type rating confirms it is not sealed against hose-down or dust. Frame R9 dictates the physical footprint and mounting hole pattern; verify clearance for the enclosure depth and cable entry before panel layout.