The ABB 3ABD00059720-D is an ACS880-04 LV AC industrial single drive module with position control, rated 315 kW normal-use output at 460 A, 380–500 V input on a 3-phase supply. Light-overload use (variable-torque fans/pumps) returns to 315 kW at 450 A, so the normal-use and light-overload curves converge at this frame size. Frame size R10 dictates the cabinet cutout and bus-bar layout — verify mechanical compatibility with the existing ACS880-04 lineup before committing the BOM line. The module carries a D150+E208+N5700 option set, which includes the position-control firmware and I/O extensions for closed-loop motion.
Supply and compliance posture
Enclosure is IP20 (Open Type per NEMA), meaning the module requires a cabinet for dust or washdown environments — it is not stand-alone rated for floor mounting.
Sizing against the duty cycle
The three duty ratings tell the selection story: normal-use 315 kW / 460 A for general industrial loads, heavy-duty 200 kW / 330 A for applications demanding 150% overload capability (crushers, mixers), and light-overload 315 kW / 450 A for variable-torque loads. The heavy-duty current is the binding constraint — if your motor draws more than 330 A under peak torque, step up to the next frame size.
Integration notes
Mounts as a module within the ACS880-04 multi-drive cabinet system — not a stand-alone wall-mount unit. The R10 frame uses a bolted bus-bar connection; torque specs for the DC-link and motor terminals follow the ABB installation manual for this frame. IP20 means the cabinet must provide the environmental seal; plan for forced-air cooling if the enclosure is sealed.