The ABB 3AXD50000222629 is a current-production R11 frame drive delivering 160 kW normal-duty output (302 A) and 132 kW heavy-duty output (260 A) from a 380–500 VAC, 47.5–63 Hz three-phase supply. The heavy-duty current is the number that governs motor overload capability in a continuous process; the 302 A normal-duty figure applies when the load profile stays below 110 % overload for short intervals. The drive includes a control unit, so no separate controller purchase is needed for basic operation. Enclosure is IP20 (open-type NEMA) — sized for cabinet mounting where the environment stays clean and dry. The R11 frame is a large module; plan panel depth and gland-plate access accordingly.
The drive is exempt from EU ecodesign energy-efficiency requirements under Regulation EU/2019/1781 §2.3.d, as a low-harmonic drive. Efficiency class is listed as IE2. UL technical ratings are provided: heavy-duty use at 200 Hp / 260 A, light-overload use at 250 Hp / 302 A.
Environmental and mounting considerations
Rated for operation at altitudes up to 4000 m — useful for installations in high-altitude plants or mine sites where derating curves typically start above 1000 m. Ambient temperature maximum is +55 °C, with humidity range 5–95 % non-condensing. Standby loss is 243 W; the drive dissipates 4773 W at full load, so forced-air cooling and cabinet sizing must account for that heat rejection. Sound pressure level is 75 dB(A) — noticeable in a control room; locate the cabinet away from operator stations if noise is a concern. The drive includes two analog inputs and two analog outputs, plus 6 digital inputs and 2 digital outputs. Communication is via CAN; no onboard Industrial Ethernet. The module contains two CR2032 lithium coin cells (220 mAh each) for memory backup.