The AF65-30-00-41: The 68 A rating is the conventional free-air thermal current (Ith) for the main poles. For motor starting duty (AC-3), the contactor will typically carry a lower rated operational current — check the specific AC-3 value in the full datasheet to confirm it matches your motor FLA. The 24-60 V AC/DC coil covers both control voltage standards, so it works in 24 VDC control circuits common in PLC panels as well as 48 V or 60 V AC systems. The 3-pole configuration is standard for three-phase motor or load switching.
Panel integration
The 68 A rating means the main power terminations accept cable sizes appropriate for that current range — typically up to 25 mm² or 35 mm² depending on lug type. Leave adequate side clearance for heat dissipation and for auxiliary contact blocks that snap onto the front or side. Coil terminals are clearly marked; verify polarity for DC operation (the contactor is polarity-sensitive on DC).