The EHDB130C2P-1 is a 2-pole definite-purpose contactor rated 130 A with a 120/60 V coil, open-style construction. That 130 A rating is the continuous current-carrying capacity through the main poles — sized for resistive or moderate inductive loads like compressor or heater banks, not for heavy motor starting duty where AC-3 ratings would apply. The open frame means it mounts inside a panel; no enclosure, so factor in your own deadfront or cabinet protection.
The 120/60 V coil is a 60 Hz rated coil at 120 V — common for North American control transformers. Coil pickup and dropout voltages follow NEMA ICS standards for definite-purpose contactors. If your control voltage is 110 V at 50 Hz, the coil will still pull in but expect slightly higher inrush; verify the operating range against your actual supply before committing the BOM line.