Skip to main content
ABB 1SFA895007R7020

ABB PST72 1SFA895007R7020 Softstarter, 72 A, 37 kW

MPN 1SFA895007R7020
Obsolete

ABB PST72 series softstarter, order code 1SFA895007R7020, 72 A rated operational current in-line connection, 37 kW at 400 V, 400-690 V AC main circuit, built-in electronic overload protection, ramp time 0-120 s.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA895007R7020 specifications
ParameterValue
Terminal typeScrew Terminal
VoltageMain Circuit 400 ... 690 V AC
Frequency50/60 Hz
ProtocolFiledBusPlug(Standard)
Temp operating max50 °C
Temp operating min0 °C

Product details

The ABB 1SFA895007R7020 is a PST72 series softstarter rated for 72 A in-line connection (124 A inside-delta), delivering 37 kW at 400 V in-line or 59 kW inside-delta. It handles main circuit voltages from 400 to 690 V AC at 50/60 Hz, making it a fit for European 400 V and 690 V industrial networks without a step-down transformer. Built-in electronic overload protection eliminates the need for a separate overload relay, saving panel space and wiring. The ramp time is adjustable from 0 to 120 seconds, with initial voltage during start settable between 30 and 70% and a step-down voltage special ramp from 100 to 30%. Current limit function spans 1.5 to 7x Ie, and starting capacity is 3x Ie for 15 seconds.

Screw terminals on the control circuit accept rigid 1 x 2.5 mm², torqued to 0.5 N·m. Main circuit connecting capacity is rigid 1 x 10 to 95 mm², sized for the 72 A rating. Supply circuit connects via rigid 1 x 2.5 mm². The degree of protection on main terminals is IP10 per IEC 60529 and IEC 60947-1 — adequate for enclosed panel mounting, not for open washdown areas. Communication uses a standard FieldBusPlug, allowing direct connection to a fieldbus network without additional wiring. Signal relays are provided for run, fault, bypass, and overload status — four discrete outputs that can feed a PLC or indicate panel status. LED indication: red for fault, yellow for protection.

MPN
1SFA895007R7020