Skip to main content
ABB 1SFA897115R7001

ABB PSE370 Soft Starter 1SFA897115R7001, 208-600V AC, Modbus

MPN 1SFA897115R7001
Active

ABB PSE370 soft starter, 1SFA897115R7001, soft start with torque control, 208...600 V AC, Modbus-RTU, 0...30 s ramp, current production.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

1SFA897115R7001 specifications
ParameterValue
Terminal typeMain Circuit: Bars
Voltage208 ... 600 V AC
Frequency50/60 Hz
ProtocolModbus-RTU
Temp operating max60 °C
Temp operating min-25 °C

Product details

The ABB PSE370 soft starter 1SFA897115R7001 delivers soft start with torque control for three-phase induction motors, with a ramp time adjustable from 0 to 30 seconds and an initial voltage setting between 30 and 70 % of line voltage — giving you control over the acceleration profile for pump, fan, or conveyor starts without mechanical shock. Rated for 208 to 600 V AC at 50/60 Hz, it carries a control supply of 100–250 V AC and a separate 24 V DC control circuit, so it fits standard panel voltages across regions. Built-in electronic overload protection covers locked rotor, current underload, and EOL conditions, with a current limit function adjustable from 1.5 to 7 times the motor full-load current — one less external relay to wire.

Integration and communications

Modbus-RTU on the control terminals lets a PLC or HMI read run, fault, overload, and bypass status directly — three dedicated signal relays (run, fault, bypass, overload) are also available for hardwired interlocks. A 4–20 mA analog output provides a proportional motor current signal for remote monitoring or trending. Main circuit connections are via bars with an 8.5 mm hole diameter; control wiring accepts 1 x 2.5 mm² rigid, tightened to 0.5 N·m. The main terminals are IP00 per IEC 60529, so it lives inside a panel — not outdoors.

RoHS compliant per EU Directive 2011/65/EU and Amendment 2015/863, classified as B2B WEEE Category 5 (Small Equipment).

MPN
1SFA897115R7001