Skip to main content
ABB 3AXD50001110079

ABB 3AXD50001110079 ACH180 Micro Drive, 0.75 kW, BACnet

MPN 3AXD50001110079
Active

ABB ACH180 series micro drive, order code 3AXD50001110079, 0.75 kW normal-use output, 4.8 A, 200-240 V three-phase, IP20, BACnet communication, frame size R0.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3AXD50001110079 specifications
ParameterValue
Input voltage200 ... 240 V
Output current4.8 A
Output power0.75 kW
Frequency47.5 ... 63 Hz
Phases3-phase
IP ratingIP20
ProtocolBACNET
MountingModule
Frame sizeR0

Product details

The ABB 3AXD50001110079 is an ACH180-series micro drive rated for 0.75 kW normal-use output at 4.8 A on a 200-240 V three-phase supply. Heavy-duty use derates to 0.55 kW and 3.2 A — sized for a constant-torque load like a small conveyor or positive-displacement pump. Light-overload use holds at 0.75 kW, 4.6 A, matching the normal-use power but with slightly lower current headroom. UL ratings land at 1 Hp normal-use and light-overload, 0.75 Hp heavy-duty. Built-in BACnet communication makes this drive a direct fit for HVAC building-automation networks — no gateway or protocol converter needed. The 44 W power consumption is the drive's own draw, not the motor load; budget it for panel ventilation and UPS sizing. The drive includes a control unit and mounts as a module in frame size R0. IP20 enclosure means it's for clean indoor panels only — no washdown or dust.

I/O and wiring note

Two analog inputs and one analog output handle speed reference and feedback — 0-10 V or 4-20 mA, jumper-selectable. Four digital inputs and two digital outputs cover start/stop, fault reset, and run-status. No industrial Ethernet interface on this variant; BACnet rides on RS-485, so plan for a serial connection to the BMS controller. Frequency range is 47.5 to 63 Hz, covering 50 Hz and 60 Hz grids without reconfiguration. Power factor of 0.98 is typical for a diode-front-end drive; no active PFC stage, so harmonic content is standard for this class.

MPN
3AXD50001110079