Skip to main content
ABB AF30-30-00-14

AF30-30-00-14 ABB Contactor, 50A, 600V, 3-Pole, 250-500V Coi

MPN AF30-30-00-14

ABB AF30-30-00-14 IEC contactor, 50 A, 600 VAC, 3-pole, 250-500 VAC/VDC coil, AF30 frame, no auxiliary contacts.

$162.12 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

AF30-30-00-14 specifications
ParameterValue
Product typeContactor
Current50 A
Poles3

Product details

Rated current and voltage — what drives the fit

The ABB AF30-30-00-14 is a 3-pole IEC contactor rated for 50 A at 600 VAC. That 50 A figure is the continuous thermal current (Ith) under IEC 60947-4-1; it governs the resistive load it can switch continuously. For motor duty (AC-3), the same frame typically derates — the 50 A Ith means it handles a 3-phase motor up to roughly 22 kW at 400 VAC, though the exact motor rating depends on the load cycle and ambient temperature in the panel. The control coil accepts AC or DC across a single range of 250-500 V. That dual-voltage capability simplifies stocking — one coil covers both 277 VAC and 480 VAC control circuits common in North American panels, and the DC rating handles 250-500 VDC battery-backed trip circuits. No need to swap coils between AC and DC supplies.

Panel integration — what the DIN-rail mount means

In a control panel, that means it occupies one modular unit of width (roughly 45 mm per pole for this frame). Leave a finger's width of air gap above and below the contactor for natural convection cooling — the 50 A rating assumes free air at 40 °C ambient; stacking it tight against other heat sources derates the continuous current. No auxiliary contacts are fitted on this variant (the -00-14 suffix indicates zero auxiliaries). If you need feedback to a PLC or a hold-in circuit, an auxiliary contact block from the same AF-line family mounts on the side without tools. The contactor's coil terminals are clearly marked A1/A2 on the front face.

MPN
AF30-30-00-14