Skip to main content
ABB S271-K6

ABB S271-K6 6A 1P DIN Rail MCB, Trip Curve K

MPN S271-K6

ABB S271-K6, 1-pole miniature circuit breaker, 6 A, Trip Curve K, DIN rail mount.

$53.47 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

S271-K6 specifications
ParameterValue
Product typeTrip Curve K
Current6 A
Poles1
MountingDIN Rail

Product details

The K curve means it's designed for motor and inductive loads — it holds through the inrush without nuisance tripping, then clears fast on a hard fault. Same part, different passport: this is the genuine ABB unit, current lifecycle per the manufacturer, available through independent distribution channels.

6 A is the continuous rated current — it's the load it can carry indefinitely at rated ambient. Trip Curve K has a magnetic trip threshold of roughly 8–12× In, so a 6 A unit will hold a motor starting surge of 48–72 A for a few cycles before the magnetic element trips. That's tighter than Curve D (10–20× In) but looser than Curve C (5–10× In). For a 1-pole breaker, that means it's protecting a single-phase motor or a transformer primary, not a lighting circuit. The 1-pole form factor snaps onto standard DIN rail, so it occupies one module width in the panel.

Panel integration

One-pole width (roughly 17.5 mm). Wire termination is via screw terminals — typical for this class. No special cutout or gland plate needed; it fits in any standard distribution board or sub-panel. For a 6 A motor branch circuit, pair it with a contactor and overload relay downstream; the K curve gives you the coordination window.

MPN
S271-K6