Skip to main content
Schneider Electric A9A26855

Schneider Electric A9A26855 Acti9 iSD Fault Contact, 1 C/O,

MPN A9A26855
Obsolete

Schneider Electric Acti9 iSD auxiliary fault contact, 1 C/O, AC/DC, 9 mm wide, clip-on DIN rail mount, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9A26855 specifications
ParameterValue
Main product or component typeFault contact
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-35 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to EN/IEC 60947-5-1
ColorWhite
Depth73 mm
Width9 mm
Height86 mm
Operating temperature-35...70 °C

Product details

Rated current and switching capability

The contact carries DC-12 ratings across several voltage points: 6 A at 24 V DC, 2 A at 48 V DC, 1.5 A at 60 V DC, and 1 A at 130 V DC. On the AC side it is rated AC-12 at 6 A / 240 V AC and 3 A / 415 V AC, 50/60 Hz. These are the maximum switching currents for resistive loads at each voltage — the actual load in the circuit must not exceed the applicable row.

Operating temperature range is -35 to 70 °C, storage -40 to 85 °C, with 95 % relative humidity at 55 °C. Pollution degree 3 per the same standard, so it tolerates conductive pollution in industrial control panels.

Screw clamp terminals on top accept 0.5 to 2.5 mm² flexible or 1 to 4 mm² rigid wire. Two conductors per terminal are allowed: 2 × 2.5 mm² rigid or 2 × 1.5 mm² flexible with ferrule. Wire stripping length is 10 mm, tightening torque 1 N·m. A mechanical indicator shows local signalling of the contact state.

MPN
A9A26855