Skip to main content
Schneider Electric A9F75313

Schneider A9F75313 Acti9 iC60N MCB, D Curve 13A 3P 36kA

MPN A9F75313
Obsolete

Schneider Electric Acti9 iC60N, miniature circuit breaker, 3P, 13 A, D curve, 36 kA Icu at 12-133 V AC, DIN rail mount, thermal-magnetic trip.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9F75313 key specifications
ParameterValue
Control typeToggle
Trip unit typeThermal-magnetic
Main product or component typeMiniature circuit-breaker
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-2
Utilization categoryCategory A conforming to EN/IEC 60947-2
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-35 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to EN/IEC 60947-2

All specifications

A9F75313 additional specifications
ParameterValue
ColorWhite
Depth78.5 mm
Width54 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationDistribution
Operating temperature-35...70 °C

Product details

The A9F75313 is a Schneider Acti9 iC60N miniature circuit breaker — 3-pole, 13 A rated current, D trip curve. The 36 kA Icu at 12-133 V AC (EN/IEC 60947-2) is the maximum fault current it can safely interrupt at that voltage range; at 220-240 V that drops to 20 kA, and at 380-415 V to 10 kA — still enough for most distribution panels behind a transformer. Dual-rated to both EN/IEC 60898-1 (the MCB standard) and EN/IEC 60947-2 (the industrial breaker standard), so it qualifies for either residential or industrial duty. Thermal-magnetic trip means the thermal bimetal handles overloads (slow, inverse-time), and the solenoid handles short circuits (instantaneous). IP20 finger-safe terminals, so it's fine inside an enclosure but not for wet locations.

Dual-certified to EN/IEC 60898-1 (the household/ similar installation MCB standard) and EN/IEC 60947-2 (the low-voltage switchgear and controlgear standard for industrial applications). This dual rating is the key differentiator from a purely domestic MCB — it means the breaker is tested and marked for both duty classes, so it can be specified into an industrial panel without a separate industrial-grade breaker. Suitability for isolation is confirmed under both standards — you can safely use it as a disconnecting means.

MPN
A9F75313