Skip to main content
Schneider Electric A9GSB292

Schneider Electric A9GSB292 Acti9 SBI Fuse-Disconnector, 2P,

MPN A9GSB292
Active

Schneider Electric Acti9 SBI, fuse-disconnector, 2 poles, 125 A, for 22 x 58 mm fuses, 690 V AC, IEC EN 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9GSB292 specifications
ParameterValue
Main product or component typeFuse-disconnector
Voltage690 V AC
Temp storage max80 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-20 °C
Storage temperature-40...80 °C
Pollution degree3
Depth70 mm
Width70 mm
Height126.5 mm
Operating temperature-20...60 °C

Product details

The Schneider Electric A9GSB292 is an Acti9 SBI fuse-disconnector, a 2-pole switch rated for 690 V AC that accepts 22 x 58 mm fuses up to 125 A. It's built to IEC EN 60947-3, which covers the making, carrying, and breaking of currents under normal and specified overload conditions — the standard that governs disconnect switches in industrial panels. The AM GG fuse curve means it's intended for motor-circuit protection, where the fuse needs to handle inrush without nuisance blowing while still clearing a fault.

The 70 mm width (8 x 9 mm pitches) takes up two module spaces. Terminals accept 1.5 to 50 mm² rigid or 2.5 to 35 mm² flexible cable, with a 12 mm strip length and 4 N·m tightening torque. That's a solid grip for the 125 A rating; make sure the ferrule is seated fully before torquing.

Environmental and installation notes

The switch is not padlockable, so if lockout/tagout is required at the disconnect point, you'll need a separate provision.

MPN
A9GSB292