Skip to main content
Schneider Electric A9GSB792

Schneider Electric A9GSB792 Acti9 SBI Fuse-Disconnector, 3P+

MPN A9GSB792
Active

Schneider Electric Acti9 SBI fuse-disconnector, 3P+N, 125 A, for 22 x 58 mm fuses, 690 V AC, IEC EN 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9GSB792 specifications
ParameterValue
Main product or component typeFuse-disconnector
Voltage690 V AC
Temp storage max80 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-20 °C
Storage temperature-40...80 °C
Pollution degree3
Depth70 mm
Width140 mm
Height126.5 mm
Operating temperature-20...60 °C

Product details

The Schneider Electric A9GSB792 is an Acti9 SBI fuse-disconnector, 3P+N, rated 125 A at 690 V AC. It takes 22 x 58 mm fuses with a GG or AM curve. That 690 V AC rating means it handles line-to-line voltage in 400 V three-phase systems with headroom — no derating worry on a standard 400 V panel. The 125 A continuous rating covers most feeder circuits up to that size; if your load draws less, the fuse rating you install sets the protection level, not the switch body.

Screw-clamp terminals accept 1.5 to 50 mm² rigid cable, or 2.5 to 35 mm² flexible (with or without ferrule). Strip length is 12 mm; tightening torque is 4 N.m. That's a generous wire range — covers everything from control-circuit tails to main feeder conductors. Terminal position is top or bottom, so you can feed either direction.

MPN
A9GSB792