Skip to main content
Schneider Electric A9L16558

A9L16558 Acti9 iPRD Surge Arrester, 3P, 460V, Obsolete

MPN A9L16558
Obsolete

Schneider Electric Acti9 iPRD Type 2 surge arrester, 3 poles, 460 V AC continuous, 65 kA max discharge, with remote signalling, white (RAL 9003).

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L16558 specifications
ParameterValue
Voltage400 V AC (+/- 10 %) at 50/60 Hz
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
ColorWhite (RAL 9003)
Depth69 mm
Width54 mm
Height81 mm
ApplicationDistribution
Operating temperature-25...60 °C

Product details

It handles a nominal discharge current of 20 kA (L/PE) and a maximum discharge current of 65 kA (L/PE), with a protection level under 2 kV. The unit is designed for distribution panels and clips onto a DIN rail, occupying 6 modular pitches (54 mm wide).

This part is officially obsolete per the manufacturer. There is no listed direct successor order code, so replacement requires a parametric cross-reference against current Acti9 iPRD variants.

The 460 V continuous operating voltage (Uc) means this arrester stays connected on 400 V networks with up to +10% tolerance without degrading the MOV elements. The Type 2 classification (IEC 61643-11) confirms it is intended for main distribution board installation, clamping surge currents from switching events or indirect lightning strikes — not for direct-strike primary protection. The remote signalling contact (1 C/O, rated 0.25 A / 250 V AC) allows the panel PLC or building management system to monitor cartridge end-of-life without a visual inspection.

Clip-on DIN rail mounting, 54 mm wide (6 x 9 mm pitches), 81 mm tall, 69 mm deep. Tunnel-type terminals accept 2.5 to 35 mm² conductors on both top and bottom. The associated circuit breaker options (IC60N, iC60H, NG125N/H/L — all 50 A curve C) define the upstream overcurrent protection; coordination between arrester and breaker is already validated by Schneider for those combinations.

MPN
A9L16558