Skip to main content
Schneider Electric A9N18543

Schneider Electric A9N18543 Acti9 Vigi C120, 4P 300 mA Type

MPN A9N18543
Active

Schneider Electric Acti9 Vigi C120, add-on residual current device, 4P, 300 mA, Type AC, 125 A, IP20, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9N18543 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-1
IP ratingIP20
Temp storage max60 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...60 °C
Pollution degree3 conforming to IEC 60947-2
ColorWhite
Depth73 mm
Width198 mm
Height95 mm
Mechanical life cycles20000 cycles
Operating temperature-5...60 °C

Product details

The Schneider Electric A9N18543 is an Acti9 Vigi C120 add-on residual current device (RCD) — a 4-pole, 300 mA sensitivity, Type AC earth-leakage block that clips onto the outgoing side of a compatible Acti9 C120 MCB. It's voltage-independent, so it trips on residual current alone without needing a separate power supply to the electronics. Rated 125 A continuous at 230...415 V AC, 50/60 Hz, it's sized for the main incomer or a large subfeed in a commercial or light-industrial distribution board.

The 300 mA sensitivity is the standard for fire-protection RCDs — it won't nuisance-trip on normal leakage from long cable runs or equipment filters, but it still clears a ground fault before the fault energy reaches ignition levels. The 125 A rating matches the C120 MCB frame, so the RCD and MCB share the same continuous-current capacity — no derating mismatch on the outgoing feeder. Pollution degree 3 per IEC 60947-2 means it's rated for the conductive-dust and condensation environment inside a typical distribution panel — no need for a sealed enclosure unless the panel itself is in a washdown zone. The IP20 finger-safe terminals are fine behind a locked cabinet door. The 6 kV impulse withstand voltage (Uimp) tells you it survives the switching surges and indirect lightning strikes common on 230/400 V networks without flashover across the internal gap.

The 4-pole block occupies 10 x 9 mm pitches (90 mm of rail width). It connects to the MCB via screws through the tunnel terminals — 1 to 50 mm² rigid or 1 to 35 mm² flexible, stripped 15 mm, torqued to 3.5 N·m. That's a heavy cable range for a 125 A feeder; you can land a 50 mm² tail without a pin ferrule.

MPN
A9N18543