Skip to main content
Schneider Electric A9N18589

Schneider Electric A9N18589 Acti9 Vigi C120, 125A 4P 1000mA

MPN A9N18589
Active

Schneider Electric Acti9 Vigi C120 add-on residual current device, A9N18589, 4P, 125 A, Type A, selective, 1000 mA, 230…415 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9N18589 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-1
IP ratingIP20
Temp storage max60 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...60 °C
Pollution degree3 conforming to IEC 60947-2
ColorWhite
Depth73 mm
Width198 mm
Height95 mm
Mechanical life cycles20000 cycles
Operating temperature-25...60 °C

Product details

The Schneider Electric A9N18589 is an add-on residual current device from the Acti9 Vigi C120 range, designed to clip onto the outgoing side of a compatible MCB or MCCB. It provides earth-leakage protection for a 4-pole circuit rated at 125 A, with a 1000 mA sensitivity and Type A waveform detection — meaning it catches sinusoidal AC faults plus pulsating DC residual currents, which covers most modern electronic loads like VFDs, UPS systems, and switching power supplies. The unit is voltage-independent for its tripping mechanism, so it will still disconnect on a residual fault even if the line voltage collapses — a critical safety feature for circuits where loss of neutral or phase could otherwise leave a ground fault undetected. It carries a selective (time-delayed) characteristic, meaning it will ride through short-duration earth-leakage pulses (like those from capacitive inrush on filter circuits) and only trip on sustained faults. This lets it coordinate downstream with faster RCDs, so a nuisance trip on a branch doesn't take out the whole submain.

It connects to the upstream MCB via screw terminals, with tunnel-type terminals accepting 1…50 mm² rigid or 1…35 mm² flexible cable.

MPN
A9N18589