Skip to main content
Schneider Electric A9Q31240

Schneider Electric A9Q31240 Acti9 Vigi iC60, 2P, 40A, 30mA,

MPN A9Q31240
Active

Schneider Electric Acti9 Vigi iC60 add-on RCD, 2P, 40 A, 30 mA, Type A-SI, instantaneous, 230…240 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9Q31240 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...240 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...240 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width36 mm
Height91 mm
Operating temperature-25...60 °C

Product details

The Schneider Electric A9Q31240 is an add-on residual current device from the Acti9 Vigi iC60 range, designed to clip onto the downstream side of an iC60 miniature circuit breaker. It provides earth-leakage protection for a 2-pole outgoing circuit, rated at 40 A with 30 mA sensitivity, Type A-SI (Super Immunised) — meaning it handles pulsed DC fault currents and resists nuisance tripping from high-frequency harmonics or transient surges common on modern electronic loads. The voltage-independent tripping mechanism means the RCD operates even if the neutral or phase voltage is lost, a reliability feature for critical-process circuits where a loss of supply must not disable the ground-fault protection.

Sizing and fit for the DIN-rail panel

Occupies 4 modules of 9 mm pitch (36 mm total width) on standard DIN rail, clip-on mounting. Depth is 73.5 mm, height 91 mm. The bottom tunnel terminals accept 1…35 mm² rigid or 1…25 mm² flexible cable, with a stripping length of 14 mm and tightening torque of 3.5 N·m. Comb-busbar compatible from the bottom, so the outgoing feeder can be daisy-chained to adjacent devices without additional wiring. IP20 rated (IP40 within a modular enclosure), suitable for installation in a clean, dry panel environment.

Electrical environment and selectivity

Insulation voltage 500 V AC, impulse withstand 6 kV. The 8/20 µs impulse withstand of 3000 A per IEC 61009-1 means it survives common lightning-induced or switching surges without damage. The instantaneous time delay (no intentional delay) means it trips as soon as the 30 mA threshold is exceeded — use for circuits where rapid disconnection is required, but coordinate with upstream delayed RCDs to avoid nuisance tripping on a multi-circuit panel.

MPN
A9Q31240