Skip to main content
Schneider Electric A9S68492

Schneider Electric A9S68492 Acti9 iINT Switch Disconnector,

MPN A9S68492
Active

Schneider Electric Acti9 iINT, 4P switch disconnector, 125 A at 400 V AC, AC-22A utilisation category, DIN rail mount, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S68492 key specifications
ParameterValue
Control typeToggle
Main product or component typeSwitch disconnector
Voltage415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current125 A at 400 V AC 50/60 Hz
Utilization categoryAC-22 A
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C

All specifications

A9S68492 additional specifications
ParameterValue
Pollution degree3
ColorWhite
Depth73 mm
Width72 mm
Height85 mm
Electrical life cycles2500 cycles
Mechanical life cycles20000 cycles
ApplicationControl Isolation
Operating temperature-25...60 °C

Product details

The Schneider Electric A9S68492 is a 4-pole switch disconnector from the Acti9 iINT range, rated for 125 A at 400 V AC in AC-22A utilisation category. That AC-22A rating means it's designed for switching mixed resistive and inductive loads, including motor loads at moderate switching frequencies — the standard duty for control isolation in distribution panels.

Mounts fixed on DIN rail, occupying 72 mm width and 85 mm height with a 73 mm depth — a standard 4-module footprint that fits alongside MCBs and RCDs in a distribution board. The tunnel-type terminals accept 6…50 mm² rigid or 6…35 mm² flexible cable, which is generous for the 125 A rating and allows paralleling of supply conductors if needed.

Electrical ratings and isolation suitability

The switch is explicitly suitable for isolation with a visible contact position indicator and ON/OFF local signalling. Short-time withstand current [Icw] is 1500 A, and the short-circuit making capacity [Icm] is 5 kA for the switch-disconnector alone — adequate for most sub-distribution applications where upstream protection is a suitably rated MCCB or fuse.

MPN
A9S68492