Skip to main content
Schneider Electric A9S70780

Schneider Electric A9S70780 Acti9 iSW-NA Switch Disconnector

MPN A9S70780
Active

Schneider Electric Acti9 iSW-NA switch disconnector, A9S70780, 3P + N, 80 A rated at 400/415 V AC, AC-22A, IP20, clip-on DIN-rail mount.

$46.27 – $134.10 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9S70780 key specifications
ParameterValue
Control typeRemote tripping Toggle
Main product or component typeSwitch disconnector
Voltage400...415 V AC 50/60 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to EN/IEC 60947-3
Current80 A at 400/415 V AC 50/60 Hz
Utilization categoryAC-22 A conforming to EN/IEC 60947-3
IP ratingIP20
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-35 °C
Storage temperature-40...85 °C

All specifications

A9S70780 additional specifications
ParameterValue
Pollution degree3 conforming to IEC 60947-3
ColorWhite
Depth74 mm
Width72 mm
Height85 mm
Electrical life cycles10000 cycles
Mechanical life cycles20000 cycles
ApplicationIsolation Control
Operating temperature-35...70 °C

Product details

The Schneider Electric A9S70780 is an Acti9 iSW-NA switch disconnector with 3P + N poles, rated 80 A at 400/415 V AC 50/60 Hz. It is classified under utilisation category AC-22A per EN/IEC 60947-3, meaning it is designed for switching mixed resistive and inductive loads, including moderate motor loads, at rated current. The device is also certified for isolation use, with a contact position indicator and ON/OFF local signalling.

For isolation duty, the suitability is confirmed by the standard, so it can be used as a visible-break disconnector in a panel. The rated short-time withstand current (Icw) is 1.2 kA for 1 second, and the short-circuit making capacity (Icm) is 5 kA alone — these tell you the switch can handle fault conditions without welding contacts, but it is not a circuit breaker; upstream protection must coordinate. The pollution degree 3 rating (IEC 60947-3) indicates it can tolerate conductive pollution in industrial environments, which is typical for switchgear in factory settings.

The comb busbar compatibility (top or bottom) simplifies distribution wiring in a panel.

MPN
A9S70780