Skip to main content
Schneider Electric A9V16363

A9V16363 Acti9 Vigi iC60 3P 63A 500mA Type AC RCD, Add-On

MPN A9V16363
Obsolete

Schneider Electric Acti9 Vigi iC60 add-on residual current device, 3P, 63 A, 500 mA Type AC, instantaneous, 230…415 V AC, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9V16363 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50/60 Hz conforming to EN/IEC 61009-1 230...415 V AC 50/60 Hz conforming to EN/IEC 61009-2-1
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-2
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...85 °C
Pollution degree3 conforming to IEC 60947-2
Depth73.5 mm
Width117 mm
Height91 mm
Operating temperature-5...60 °C

Product details

The A9V16363 is a 3-pole add-on residual current device (RCD) from the Acti9 Vigi iC60 family, rated 63 A with 500 mA sensitivity, Type AC, instantaneous trip. The 63 A continuous rating matches the load current of a 3-phase outgoer — sized for a sub-distribution board feeding lighting or general-purpose socket circuits. The 500 mA earth-leakage threshold is not personnel protection (30 mA is the touch-safety limit); this is equipment-protection level, used where a higher leakage floor is tolerable to avoid nuisance tripping on long cable runs or equipment with natural leakage. Voltage-independent tripping means the RCD operates without needing a control supply — it uses the fault energy itself, so it works even if the neutral is lost upstream.

Deployment context

Occupies 7 x 9 mm pitches, so 63 mm of DIN width. Terminal tunnel accepts 1…35 mm² rigid or 1…25 mm² flexible; tighten to 3.5 N·m bottom. Wire strip length 14 mm. Comb busbar compatible from the bottom.

MPN
A9V16363