Skip to main content
Schneider Electric ATV212HD18N4

Schneider ATV212HD18N4 AC Drive (VFD) 480V, 18.5 kW

MPN ATV212HD18N4
Active

Schneider Electric Altivar 212 ATV212HD18N4 AC drive (VFD), 18.5 kW, 3-phase 480 V, 27.8 A line current, integrated class C2 EMC filter, CE, IP20, 330 x 245 x 190 mm.

$1,257.72 – $3,537.35 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV212HD18N4 key specifications
ParameterValue
Connector type1 open style 1 RJ45
Motor starter typeVariable speed drive
Main product or component typeVariable speed drive
Voltage= 1 mOhm 500 V DC for 1 minute
Current27.8 A 480 V 34.8 A 380 V
Frequency50...60 Hz - 5...5 %
Phases3-phase
IP ratingIP21
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max40 °C
Temp operating min-10 °C

All specifications

ATV212HD18N4 additional specifications
ParameterValue
Storage temperature-13...158 °F (-25...70 °C)
Pollution degreePollution degree 2
Depth7.5 in (190 mm)
Width9.6 in (245 mm)
Height13.0 in (330 mm)
Data format8 bits, 1 stop, odd even or no configurable parity
Operating positionVertical +/- 10 degree
Operating temperature14...104 °F (-10...40 °C) without derating 104...122 °F (40...50 °C) with derating factor

Product details

Altivar 212 drive, 18.5 kW at 480 V

The ATV212HD18N4 is a variable-speed drive from the Schneider Altivar 212 range, rated for 18.5 kW motor power on a 3-phase 480 V supply. Line current draws 27.8 A at 480 V (34.8 A at 380 V), so the upstream protection and cable sizing should be based on the higher figure if the installation runs at 380 V.

Integrated C2 EMC filter and compliance suite

This drive ships with a built-in class C2 EMC filter, which covers most industrial environments without an external filter. The standards list includes IEC 61800-3 categories C1 through C3, EN 55011 Class A Group 1, and IEC 61800-5-1 — meaning it meets conducted and radiated emission limits for first-environment (residential) and second-environment (industrial) installations, depending on cable length and installation practice. CE marking is on the nameplate.

Protection and monitoring coverage

The drive's protection suite covers overheating of the power stage, short-circuit between motor phases, earth faults, input phase loss, DC bus overvoltage and undervoltage, motor thermal protection, and motor phase break detection. It also accepts PTC probes for direct motor winding temperature monitoring. The adjustable PI regulator handles closed-loop process control for fans, pumps, and conveyors without an external controller.

Communication and control interface

Standard communication is via a 2-wire RS-485 physical interface using Modbus RTU protocol at 9600 or 19200 bps, 8-bit data, configurable parity. An RJ45 connector provides the bus connection. An optional LonWorks communication card is available for building-automation networks. The analogue inputs are switch-configurable between voltage (0–10 V DC) and current (0–20 mA), with 10-bit resolution.

Mounting and environmental limits

The drive measures 330 mm high, 245 mm wide, and 190 mm deep, with a vertical mounting tolerance of ±10°. It requires 100 mm clearance above and below for airflow — the fan moves 214 m³/h. Full rated current is available up to 1000 m altitude; above that, derate 1 % per 100 m up to 3000 m. For corner-grounded distribution networks, limit altitude to 2000 m. Pollution degree 2 per IEC 61800-5-1 applies.

MPN
ATV212HD18N4