Skip to main content
Schneider Electric ATV6000D430A2424ND

Schneider ATV6000D430A2424ND Medium Voltage Drive, 430 kVA

MPN ATV6000D430A2424ND
Active

Schneider Electric Altivar Process ATV6000, ATV6000D430A2424ND, medium voltage drive, 3-phase, 430 kVA, 270 kW heavy duty / 340 kW normal duty.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV6000D430A2424ND specifications
ParameterValue
Input type54 pulse diode rectifier bridge
Display type10 inch LCD touch screen multi-language
Connector type2 RJ45 on the control block)Ethernet IP/Modbus TCP 1 RJ45 on the control block)Modbus serial
Current81.0 A heavy duty 120.0 A normal duty
Frequency50 Hz +/- 5 %
Phases3-phase
IP ratingIP31
Temp storage max50 °C
Temp storage min0 °C
Temp operating max60 °C
Temp operating min1.2 °C
Storage temperature32...122 °F (0...50 °C)
Pollution degreePollution degree 2
Operating temperature32...104 °F (0...40 °C) 104...122 °F (40...50 °C) with derating factor -13...158 °F (-25...70 °C) during transport

Product details

The Schneider ATV6000D430A2424ND is a medium voltage drive from the Altivar Process ATV6000 series, built for synchronous, asynchronous, and permanent magnet motors. It runs on a 3-phase supply and delivers 430 kVA apparent power, with motor ratings of 270 kW heavy duty and 340 kW normal duty. The drive is in a floor-standing enclosure with a 10-inch LCD touch screen and integrated EMC filter rated for IEC 61800-3 category C3 on the control side and C4 on the power side.

Line current is 81.0 A heavy duty and 120.0 A normal duty — the HD figure governs continuous motor load, the ND figure covers lighter duty cycles with higher throughput. The 54-pulse diode rectifier bridge keeps total harmonic current distortion below 3 % per IEEE 519-1992, which matters for installations with strict power quality requirements. Output voltage matches the supply voltage, so no step-down transformer is needed on the motor side.

Control and communication

Slot A accepts Profibus DP V1, PROFINET, DeviceNet, CANopen (RJ45, SUB-D 9, or screw terminals), or EtherCAT. Slot B takes encoder interfaces (digital 5/12 V, analog, resolver, HTL) plus digital/analog I/O or relay extension modules. The control block includes two RJ45 for Ethernet IP/Modbus TCP and one RJ45 for Modbus serial. Digital inputs DI1–DI8 are programmable at 24 V DC; DI7 and DI8 can serve as pulse inputs up to 30 kHz. The 10-inch LCD touch screen supports multi-language HMI.

MPN
ATV6000D430A2424ND