Skip to main content
Schneider Electric CAD50AM7

Schneider Electric CAD50AM7 TeSys Deca Control Relay, 5NO, 2

MPN CAD50AM7
Active

Schneider Electric TeSys Deca CAD50AM7 control relay, 5 normally open contacts, 220V AC standard coil, snap-in terminals, 45 mm width.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

CAD50AM7 specifications
ParameterValue
Main product or component typeControl relay
Utilization categoryAC-15 AC-14 DC-13
IP ratingIP2X
Temp storage max80 °C
Temp storage min-60 °C
Temp operating max70 °C
Temp operating min-40 °C
Storage temperature-60...80 °C
Depth93 mm
Width45 mm
Height107 mm
ApplicationControl circuit
Operating temperature-40...60 °C 60...70 °C with derating

Product details

It uses a 220 V AC standard coil and snap-in terminals for quick DIN-rail mounting and wiring. Rated for utilisation categories AC-15, AC-14, and DC-13 per EN/IEC 60947-5-1, this relay handles solenoid valve, contactor coil, and moderate inductive loads common in control logic. The front face carries IP2X protection (finger-safe per VDE 0106), so it's suitable for open-panel mounting where accidental touch is a concern. Operating temperature spans -40 to 60 °C, with derating required above 60 °C up to 70 °C — a real factor if the relay sits near a heat source or in a sealed enclosure.

Standards and compliance — what the approvals mean

The CAD50AM7 carries full global approvals: EN/IEC 60947-5-1 (the main control-circuit device standard), UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5 (China), and JIS C8201-5-1 (Japan). That means it's accepted in panels destined for North America, Europe, China, and Japan without a separate review cycle — one part for multi-region builds.

The relay measures 45 mm wide, 107 mm high, and 93 mm deep — a standard TeSys Deca footprint that fits alongside contactors and overloads on the same DIN rail. The 45 mm width is three module spaces (at 15 mm per module), which matters when laying out a dense control row. Snap-in terminals mean no screws for the main connections — just strip, insert, and lock. The protective treatment is TH conforming to IEC 60068, so the relay handles tropical humid environments without corrosion issues.

MPN
CAD50AM7