Skip to main content
Schneider Electric ENW13278

ENW13278 EasyPact NW Switch Disconnector, 630 A, 3P, Drawout

MPN ENW13278
Active

Schneider Electric EasyPact NW series, ENW13278 switch disconnector, 3-pole, 630 A AC-23A, drawout mounting, 277 x 358 x 322 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13278 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 630 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C without control unit

All specifications

ENW13278 additional specifications
ParameterValue
Pollution degreeclass 3
Depth277 mm
Width358 mm
Height322 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

The ENW13278 is a 3-pole switch disconnector from the Schneider Electric EasyPact NW range, rated 630 A in AC-23A utilisation category at 440 V AC. The drawout mounting allows the switching element to be withdrawn from the cradle for maintenance or replacement without disturbing the main bus connections — a feature that reduces downtime in switchboard and MCC lineups.

The 630 A rated operational current (Ie) in AC-23A covers motor starting and mixed resistive-inductive loads — the category for frequent switching of motors, transformers, and capacitor banks. The 50 kA rated short-time withstand current (Icw) for 1 second at 220–440 V means this switch can hold closed through a fault long enough for an upstream protective device to clear, preserving selectivity in a distribution panel. The 75 kA rated short-circuit making capacity (Icm) confirms it can close onto a fault without welding contacts. Suitability for isolation per IEC 60947-3 is confirmed, so the switch can serve as a visible-break disconnecting means for a downstream load. The contact position indicator gives a clear visual confirmation of open or closed state.

The ENW13278 carries an active lifecycle status from Schneider Electric. It is a current-production part within the EasyPact NW family, so it remains a qualified BOM line for new switchboard builds and replacement spares.

MPN
ENW13278